CCBOOTCAMP offers wireless training!
I’m proud to say that we’ve invested almost $500k in Cisco wireless equipment to have the best CCIE Wireless training lab in the world. We’ve even got a 6500 with a sup720-3b and a WISM. How juicy is that?
. 27 Feb 10 | Uncategorized | Comments (0)
CCBOOTCAMP Rocks!
Just testing out the new updated software…more to come!
. 27 Feb 10 | Uncategorized | Comments (0)
CCBOOTCAMP is a CLSP
Finally, after years of doing authorized Cisco training, CCBOOTCAMP is a Cisco Learning Solutions Partner. Hurray!
. 07 Aug 09 | Uncategorized | Comments (0)
Q n Q Tunneling
Q n Q Tunneling
December 16, 2009
By David Clark, CCIE# 14742 (Routing and Switching), CCSI# 31937
Service providers often have multiple customers with overlapping VLAN ranges. Q-in-Q tunneling or 802.1Q tunneling is the mechanism that allows service providers to preserve customer VLANS being transported through the service provider networks. Q-in-Q tunneling uses a two-level VLAN tag structure. Each customer is assigned a unique VLAN within the service providers network, this unique tag is added to all incoming frames from the customer network. The original frame from the customer remains untouched. The inner frame is often referred to as the customer VLAN tag because the customer originally assigns it.
Q-in-Q tunneling significantly reduces the number of VLAN required within a customer network as each customer is assigned a unique VLAN. To the customer the service provider network appears as a transparent bridge connecting their sites together.
When configuring Q-in-Q tunneling the ports connected directly to the customer switch are configured with the command “switchport trunk encapsulation dot1q”. The customer ports are configured as per normal and require no extra configuration.
interface FastEthernet0/20
description customer
switchport trunk encapsulation dot1q
switchport mode trunk
switchport nonegotiate
end
Interface FastEthernet0/21
description service provider
switchport access vlan 21
switchport mode dot1q-tunnel
l2protocol-tunnel cdp
l2protocol-tunnel stp
l2protocol-tunnel vtp
no cdp enable
end
In the above example Fast 0/20 resides on the customer switch, while Fast 0/21 is on the service provider switch and configured as a tunnel port. VLAN 21 becomes the outer tag and is added to all frames from Fast 0/20 sent down to Fast 0/21. The service provider port is specifically configured also to carry CDP, STP and VTP frames. The configuration can be verified with the command “show l2protocol-tunnel interface fast 0/21”
If the customer is running a negotiated EtherChannel a slightly different configuration is required. On the customer side a normal EtherChannel is configured.
interface Fastethernet0/1
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 1 mode desirable
interface Fastethernet0/2
switchport trunk encapsulation dot1q
switchport mode trunk
channel-group 1 mode desirable
The service provider configuration is slightly different from the previous example.
interface Fastethernet0/1
switchport access vlan 17
switchport mode dot1q-tunnel
l2protocol-tunnel point-to-point pagp
end
interface fastethernet0/2
switchport access vlan 18
switchport mode dot1q-tunnel
l2protocol-tunnel point-to-point pagp
end
In this case we use the “l2protocol-tunnel point-to-point pagp” command to carry the PagP frames across the service provider network. Also one customer VLAN is assigned per incoming from port from the customer switch. For LACP the ““l2protocol-tunnel point-to-point LACP” would be used.
Article Source: http://www.ccbootcamp.com/support-resources/resources/articles-by-ccbootcamp.html
Tags: ccie, cisco, computer training, VLAN
. 17 Dec 08 | Uncategorized | Comments (0)
Sorry Bruce!!!
Okay, so originally I was just trying to poke fun at a couple vendors with their marketing tactics using my Trolley Car report. I unintentionally offended Bruce Caslow with, what I intended to be funny picture, was insulting to him. Since then, we have updated the report with his and Va’ls correct picture. I really have the utmost respect for Bruce Caslow and his true dedication to providing quality training. He’s one of the few guys left in this industry that gives a damn as much about making money as he does about training. Bruce - you rock. Sorry to offend you. Hopefully you’ll let me buy you a drink the next time we are together at a conference or networkers 09.
. 29 Oct 08 | Uncategorized | Comments (0)
The Trolley Car - A spoof of one of our competitors “reports”
http://www.ccbootcamp.com/collateral/the_trolley_car.pdf
. 28 Oct 08 | Uncategorized | Comments (0)